25. Acceleration on a beam with a non-planar surface
This test covers acceleration loads on a beam with a non-planar surface (spline projection).
Geometry and setup
This test uses geometry 7 circular beam with splined end.
Load cases
LC1_acceleration_1_0_0: Body acceleration applied on the entire domain along x
LC2_acceleration_0_1_0: Body acceleration applied on the entire domain along y
LC3_acceleration_0_0_1: Body acceleration applied on the entire domain along z
LC4_acceleration_1_0_1: Body acceleration applied on the entire domain along (1,0,1)
LC5_acceleration_1_1_1: Body acceleration applied on the entire domain along (1,1,1)
LC6_acceleration_1+1+1: 3 body accelerations applied consecutively on the entire domain along each of the cartesian axes
Test results
Table last updated on September 10, 2025 at 13:44 UTC
Version: 2025.09.10.1323_fcc273e8
test |
case |
scalar |
expected |
output |
delta |
tolerance |
status |
test_path |
|---|---|---|---|---|---|---|---|---|
0025 |
LC1_acceleration_1_0_0 |
reaction_forces > solid.1 > surface_set > set.2 > RFx (N) |
-1.0006E+03 |
-9.9518E+02 |
-0.5% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC1_acceleration_1_0_0 |
reaction_forces > solid.1 > surface_set > set.2 > RFy (N) |
+0.0000E+00 |
+1.5919E-10 |
-0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC1_acceleration_1_0_0 |
reaction_forces > solid.1 > surface_set > set.2 > RFz (N) |
+0.0000E+00 |
+1.7487E-10 |
-0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC1_acceleration_1_0_0 |
reaction_moments > solid.1 > surface_set > set.2 > RMx (Nm) |
+0.0000E+00 |
-1.5966E-12 |
0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC1_acceleration_1_0_0 |
reaction_moments > solid.1 > surface_set > set.2 > RMy (Nm) |
-4.4896E+00 |
-4.4640E+00 |
-0.6% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC1_acceleration_1_0_0 |
reaction_moments > solid.1 > surface_set > set.2 > RMz (Nm) |
+0.0000E+00 |
+6.8718E-03 |
-0.01 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC2_acceleration_0_1_0 |
reaction_forces > solid.1 > surface_set > set.2 > RFx (N) |
+0.0000E+00 |
+2.1398E-10 |
-0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC2_acceleration_0_1_0 |
reaction_forces > solid.1 > surface_set > set.2 > RFy (N) |
-1.0006E+03 |
-9.9518E+02 |
-0.5% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC2_acceleration_0_1_0 |
reaction_forces > solid.1 > surface_set > set.2 > RFz (N) |
+0.0000E+00 |
-6.7928E-11 |
0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC2_acceleration_0_1_0 |
reaction_moments > solid.1 > surface_set > set.2 > RMx (Nm) |
+4.4896E+00 |
+4.4640E+00 |
-0.6% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC2_acceleration_0_1_0 |
reaction_moments > solid.1 > surface_set > set.2 > RMy (Nm) |
+0.0000E+00 |
+1.6617E-12 |
-0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC2_acceleration_0_1_0 |
reaction_moments > solid.1 > surface_set > set.2 > RMz (Nm) |
+0.0000E+00 |
+6.6572E-05 |
-0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC3_acceleration_0_0_1 |
reaction_forces > solid.1 > surface_set > set.2 > RFx (N) |
+0.0000E+00 |
+2.1398E-12 |
-0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC3_acceleration_0_0_1 |
reaction_forces > solid.1 > surface_set > set.2 > RFy (N) |
+0.0000E+00 |
-8.2057E-11 |
0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC3_acceleration_0_0_1 |
reaction_forces > solid.1 > surface_set > set.2 > RFz (N) |
-1.0006E+03 |
-9.9518E+02 |
-0.5% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC3_acceleration_0_0_1 |
reaction_moments > solid.1 > surface_set > set.2 > RMx (Nm) |
+0.0000E+00 |
-6.8718E-03 |
0.01 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC3_acceleration_0_0_1 |
reaction_moments > solid.1 > surface_set > set.2 > RMy (Nm) |
+0.0000E+00 |
-6.6572E-05 |
0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC3_acceleration_0_0_1 |
reaction_moments > solid.1 > surface_set > set.2 > RMz (Nm) |
+0.0000E+00 |
+1.5472E-14 |
-0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC4_acceleration_1_0_1 |
reaction_forces > solid.1 > surface_set > set.2 > RFx (N) |
-1.0006E+03 |
-9.9518E+02 |
-0.5% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC4_acceleration_1_0_1 |
reaction_forces > solid.1 > surface_set > set.2 > RFy (N) |
+0.0000E+00 |
+7.7247E-11 |
-0.00 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC4_acceleration_1_0_1 |
reaction_forces > solid.1 > surface_set > set.2 > RFz (N) |
-1.0006E+03 |
-9.9518E+02 |
-0.5% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC4_acceleration_1_0_1 |
reaction_moments > solid.1 > surface_set > set.2 > RMx (Nm) |
+0.0000E+00 |
-6.8718E-03 |
0.01 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC4_acceleration_1_0_1 |
reaction_moments > solid.1 > surface_set > set.2 > RMy (Nm) |
-4.4896E+00 |
-4.4640E+00 |
-0.6% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC4_acceleration_1_0_1 |
reaction_moments > solid.1 > surface_set > set.2 > RMz (Nm) |
+0.0000E+00 |
+6.8718E-03 |
-0.01 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC5_acceleration_1_1_1 |
reaction_forces > solid.1 > surface_set > set.2 > RFx (N) |
-1.0006E+03 |
-9.9518E+02 |
-0.5% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC5_acceleration_1_1_1 |
reaction_forces > solid.1 > surface_set > set.2 > RFy (N) |
-1.0006E+03 |
-9.9518E+02 |
-0.5% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC5_acceleration_1_1_1 |
reaction_forces > solid.1 > surface_set > set.2 > RFz (N) |
-1.0006E+03 |
-9.9518E+02 |
-0.5% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC5_acceleration_1_1_1 |
reaction_moments > solid.1 > surface_set > set.2 > RMx (Nm) |
+4.4824E+00 |
+4.4571E+00 |
-0.6% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC5_acceleration_1_1_1 |
reaction_moments > solid.1 > surface_set > set.2 > RMy (Nm) |
-4.4896E+00 |
-4.4640E+00 |
-0.6% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC5_acceleration_1_1_1 |
reaction_moments > solid.1 > surface_set > set.2 > RMz (Nm) |
+0.0000E+00 |
+6.9384E-03 |
-0.01 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC6_acceleration_1+1+1 |
reaction_forces > solid.1 > surface_set > set.2 > RFx (N) |
-1.0006E+03 |
-9.9518E+02 |
-0.5% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC6_acceleration_1+1+1 |
reaction_forces > solid.1 > surface_set > set.2 > RFy (N) |
-1.0006E+03 |
-9.9518E+02 |
-0.5% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC6_acceleration_1+1+1 |
reaction_forces > solid.1 > surface_set > set.2 > RFz (N) |
-1.0006E+03 |
-9.9518E+02 |
-0.5% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC6_acceleration_1+1+1 |
reaction_moments > solid.1 > surface_set > set.2 > RMx (Nm) |
+4.4824E+00 |
+4.4571E+00 |
-0.6% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC6_acceleration_1+1+1 |
reaction_moments > solid.1 > surface_set > set.2 > RMy (Nm) |
-4.4896E+00 |
-4.4640E+00 |
-0.6% |
0.01 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |
0025 |
LC6_acceleration_1+1+1 |
reaction_moments > solid.1 > surface_set > set.2 > RMz (Nm) |
+0.0000E+00 |
+6.9384E-03 |
-0.01 |
0.10 |
✓ pass |
0025_geometry-0007_beam-spline-acceleration |