50. Roller boundary conditions on a rotated beam
This test covers roller boundary conditions applied to flat and cylindrical surfaces on a rotated beam.
Geometry and setup
This test uses geometry 18 square beam with top cylindrical cavity rotated.
Load cases
LC1_roller_flat: Fixed beam with rollers on two lateral surfaces, with an orthogonal load at end of the beam
LC2_roller_cylinder: Fixed beam with a roller on its top cylinder and an axial moment at its top surface
LC3_no_rollers: LC1 without rollers
Test results
Table last updated on September 10, 2025 at 13:44 UTC
Version: 2025.09.10.1323_fcc273e8
test |
case |
scalar |
expected |
output |
delta |
tolerance |
status |
test_path |
|---|---|---|---|---|---|---|---|---|
0050 |
LC1_roller_flat |
reaction_forces > solid.1 > surface_set > fix > RFx (N) |
-5.0588E+02 |
-5.0589E+02 |
0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC1_roller_flat |
reaction_forces > solid.1 > surface_set > fix > RFy (N) |
+3.1062E+02 |
+3.1064E+02 |
0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC1_roller_flat |
reaction_forces > solid.1 > surface_set > fix > RFz (N) |
-8.0474E+02 |
-8.0473E+02 |
-0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC1_roller_flat |
reaction_moments > solid.1 > surface_set > fix > RMx (Nm) |
-6.2123E+02 |
-6.2118E+02 |
-0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC1_roller_flat |
reaction_moments > solid.1 > surface_set > fix > RMy (Nm) |
+1.6095E+03 |
+1.6095E+03 |
0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC1_roller_flat |
reaction_moments > solid.1 > surface_set > fix > RMz (Nm) |
+1.0118E+03 |
+1.0118E+03 |
-0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC2_roller_cylinder |
reaction_forces > solid.1 > surface_set > fix > RFx (N) |
+0.0000E+00 |
-2.8499E+00 |
2.85 |
30.00 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC2_roller_cylinder |
reaction_forces > solid.1 > surface_set > fix > RFy (N) |
+0.0000E+00 |
+2.5714E+00 |
-2.57 |
30.00 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC2_roller_cylinder |
reaction_forces > solid.1 > surface_set > fix > RFz (N) |
+0.0000E+00 |
-4.3788E-02 |
0.04 |
30.00 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC2_roller_cylinder |
reaction_moments > solid.1 > surface_set > fix > RMx (Nm) |
-8.0474E+02 |
-8.0081E+02 |
-0.5% |
0.10 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC2_roller_cylinder |
reaction_moments > solid.1 > surface_set > fix > RMy (Nm) |
-5.0588E+02 |
-5.0363E+02 |
-0.4% |
0.10 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC2_roller_cylinder |
reaction_moments > solid.1 > surface_set > fix > RMz (Nm) |
+3.1062E+02 |
+3.1257E+02 |
0.6% |
0.10 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC3_no_rollers |
reaction_forces > solid.1 > surface_set > fix > RFx (N) |
-5.0588E+02 |
-5.0588E+02 |
-0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC3_no_rollers |
reaction_forces > solid.1 > surface_set > fix > RFy (N) |
+3.1062E+02 |
+3.1062E+02 |
-0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC3_no_rollers |
reaction_forces > solid.1 > surface_set > fix > RFz (N) |
-8.0474E+02 |
-8.0474E+02 |
-0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC3_no_rollers |
reaction_moments > solid.1 > surface_set > fix > RMx (Nm) |
-6.2123E+02 |
-6.2123E+02 |
-0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC3_no_rollers |
reaction_moments > solid.1 > surface_set > fix > RMy (Nm) |
+1.6095E+03 |
+1.6095E+03 |
-0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |
0050 |
LC3_no_rollers |
reaction_moments > solid.1 > surface_set > fix > RMz (Nm) |
+1.0118E+03 |
+1.0118E+03 |
-0.0% |
0.01 |
✓ pass |
0050_geometry-0018_roller-boundary-condition-on-rotated-beam |