37. Coupled rotated beam and normal pressure
This test covers beam to solid couplings and normal pressure loads considering a beam not aligned with any of the cartesian axes.
Geometry and setup
This test uses geometry 11 square beam rotated.
Load cases
LC1_nPressure_pos: Normal positive pressure applied on the coupling surface
LC2_nPressure_neg: Normal negative pressure applied on the coupling surface
Test results
Table last updated on September 10, 2025 at 13:44 UTC
Version: 2025.09.10.1323_fcc273e8
test |
case |
scalar |
expected |
output |
delta |
tolerance |
status |
test_path |
|---|---|---|---|---|---|---|---|---|
0037 |
LC1_nPressure_pos |
reaction_forces > solid.1 > surface_set > fix > RFx (N) |
+5.0000E+02 |
+5.0000E+02 |
-0.0% |
0.01 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |
0037 |
LC1_nPressure_pos |
reaction_forces > solid.1 > surface_set > fix > RFy (N) |
+8.5355E+02 |
+8.5355E+02 |
0.0% |
0.01 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |
0037 |
LC1_nPressure_pos |
reaction_forces > solid.1 > surface_set > fix > RFz (N) |
+1.4645E+02 |
+1.4645E+02 |
-0.0% |
0.01 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |
0037 |
LC1_nPressure_pos |
reaction_moments > solid.1 > surface_set > fix > RMx (Nm) |
+0.0000E+00 |
-2.5651E-12 |
0.00 |
0.10 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |
0037 |
LC1_nPressure_pos |
reaction_moments > solid.1 > surface_set > fix > RMy (Nm) |
+0.0000E+00 |
-4.5368E-12 |
0.00 |
0.10 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |
0037 |
LC1_nPressure_pos |
reaction_moments > solid.1 > surface_set > fix > RMz (Nm) |
+0.0000E+00 |
+2.6345E-11 |
-0.00 |
0.10 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |
0037 |
LC2_nPressure_neg |
reaction_forces > solid.1 > surface_set > fix > RFx (N) |
-5.0000E+02 |
-5.0000E+02 |
-0.0% |
0.01 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |
0037 |
LC2_nPressure_neg |
reaction_forces > solid.1 > surface_set > fix > RFy (N) |
-8.5355E+02 |
-8.5355E+02 |
0.0% |
0.01 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |
0037 |
LC2_nPressure_neg |
reaction_forces > solid.1 > surface_set > fix > RFz (N) |
-1.4645E+02 |
-1.4645E+02 |
-0.0% |
0.01 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |
0037 |
LC2_nPressure_neg |
reaction_moments > solid.1 > surface_set > fix > RMx (Nm) |
+0.0000E+00 |
+2.5651E-12 |
-0.00 |
0.10 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |
0037 |
LC2_nPressure_neg |
reaction_moments > solid.1 > surface_set > fix > RMy (Nm) |
+0.0000E+00 |
+4.5368E-12 |
-0.00 |
0.10 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |
0037 |
LC2_nPressure_neg |
reaction_moments > solid.1 > surface_set > fix > RMz (Nm) |
+0.0000E+00 |
-2.6345E-11 |
0.00 |
0.10 |
✓ pass |
0037_geometry-0011_coupled-beam-rotated-normal-pressure |