23. Normal boundary pressure on an non-planar surface
This test covers normal boundary pressure loads applied on a non-planar surface (spline projection).
Geometry and setup
This test uses geometry 7 circular beam with splined end.
Load cases
LC1_nPressure_pos: Normal positive pressure applied on the coupling surface
LC2_nPressure_neg: Normal negative pressure applied on the coupling surface
Test results
Table last updated on September 10, 2025 at 13:44 UTC
Version: 2025.09.10.1323_fcc273e8
test |
case |
scalar |
expected |
output |
delta |
tolerance |
status |
test_path |
|---|---|---|---|---|---|---|---|---|
0023 |
LC1_nPressure_pos |
reaction_forces > solid.1 > surface_set > set.2 > RFx (N) |
+0.0000E+00 |
-1.6193E-01 |
0.16 |
2.00 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |
0023 |
LC1_nPressure_pos |
reaction_forces > solid.1 > surface_set > set.2 > RFy (N) |
-1.1140E+02 |
-1.2830E+02 |
15.2% |
0.20 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |
0023 |
LC1_nPressure_pos |
reaction_forces > solid.1 > surface_set > set.2 > RFz (N) |
+8.6058E+02 |
+9.9531E+02 |
15.7% |
0.20 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |
0023 |
LC1_nPressure_pos |
reaction_moments > solid.1 > surface_set > set.2 > RMx (Nm) |
+0.0000E+00 |
+1.1927E+00 |
-1.19 |
2.00 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |
0023 |
LC1_nPressure_pos |
reaction_moments > solid.1 > surface_set > set.2 > RMy (Nm) |
+0.0000E+00 |
-1.5377E-03 |
0.00 |
0.10 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |
0023 |
LC1_nPressure_pos |
reaction_moments > solid.1 > surface_set > set.2 > RMz (Nm) |
+0.0000E+00 |
+4.3370E-05 |
-0.00 |
0.10 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |
0023 |
LC2_nPressure_neg |
reaction_forces > solid.1 > surface_set > set.2 > RFx (N) |
+0.0000E+00 |
+1.6193E-01 |
-0.16 |
2.00 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |
0023 |
LC2_nPressure_neg |
reaction_forces > solid.1 > surface_set > set.2 > RFy (N) |
+1.1140E+02 |
+1.2830E+02 |
15.2% |
0.20 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |
0023 |
LC2_nPressure_neg |
reaction_forces > solid.1 > surface_set > set.2 > RFz (N) |
-8.6058E+02 |
-9.9531E+02 |
15.7% |
0.20 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |
0023 |
LC2_nPressure_neg |
reaction_moments > solid.1 > surface_set > set.2 > RMx (Nm) |
+0.0000E+00 |
-1.1927E+00 |
1.19 |
2.00 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |
0023 |
LC2_nPressure_neg |
reaction_moments > solid.1 > surface_set > set.2 > RMy (Nm) |
+0.0000E+00 |
+1.5377E-03 |
-0.00 |
0.10 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |
0023 |
LC2_nPressure_neg |
reaction_moments > solid.1 > surface_set > set.2 > RMz (Nm) |
+0.0000E+00 |
-4.3370E-05 |
0.00 |
0.10 |
✓ pass |
0023_geometry-0007_beam-spline-boundary-pressure-normal |