15. Normal boundary pressure on an angled surface
This test covers normal boundary pressure loads applied on an angled surface.
Geometry and setup
This test uses geometry 19 square beam with sloped end.
Load cases
LC1_nPressure_pos: Normal positive pressure applied on the coupling surface
LC2_nPressure_neg: Normal negative pressure applied on the coupling surface
Test results
Table last updated on September 10, 2025 at 13:44 UTC
Version: 2025.09.10.1323_fcc273e8
test |
case |
scalar |
expected |
output |
delta |
tolerance |
status |
test_path |
|---|---|---|---|---|---|---|---|---|
0015 |
LC1_nPressure_pos |
reaction_forces > solid.1 > surface_set > fix > RFx (N) |
+1.0000E+03 |
+1.0000E+03 |
-0.0% |
0.01 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |
0015 |
LC1_nPressure_pos |
reaction_forces > solid.1 > surface_set > fix > RFy (N) |
+1.0000E+03 |
+1.0000E+03 |
-0.0% |
0.01 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |
0015 |
LC1_nPressure_pos |
reaction_forces > solid.1 > surface_set > fix > RFz (N) |
+0.0000E+00 |
-5.1898E-11 |
0.00 |
0.10 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |
0015 |
LC1_nPressure_pos |
reaction_moments > solid.1 > surface_set > fix > RMx (Nm) |
+0.0000E+00 |
-3.7143E-12 |
0.00 |
0.10 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |
0015 |
LC1_nPressure_pos |
reaction_moments > solid.1 > surface_set > fix > RMy (Nm) |
+0.0000E+00 |
+1.0372E-10 |
-0.00 |
0.10 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |
0015 |
LC1_nPressure_pos |
reaction_moments > solid.1 > surface_set > fix > RMz (Nm) |
+1.5000E+03 |
+1.5000E+03 |
-0.0% |
0.01 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |
0015 |
LC2_nPressure_neg |
reaction_forces > solid.1 > surface_set > fix > RFx (N) |
-1.0000E+03 |
-1.0000E+03 |
-0.0% |
0.01 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |
0015 |
LC2_nPressure_neg |
reaction_forces > solid.1 > surface_set > fix > RFy (N) |
-1.0000E+03 |
-1.0000E+03 |
-0.0% |
0.01 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |
0015 |
LC2_nPressure_neg |
reaction_forces > solid.1 > surface_set > fix > RFz (N) |
+0.0000E+00 |
+5.1898E-11 |
-0.00 |
0.10 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |
0015 |
LC2_nPressure_neg |
reaction_moments > solid.1 > surface_set > fix > RMx (Nm) |
+0.0000E+00 |
+3.7143E-12 |
-0.00 |
0.10 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |
0015 |
LC2_nPressure_neg |
reaction_moments > solid.1 > surface_set > fix > RMy (Nm) |
+0.0000E+00 |
-1.0372E-10 |
0.00 |
0.10 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |
0015 |
LC2_nPressure_neg |
reaction_moments > solid.1 > surface_set > fix > RMz (Nm) |
-1.5000E+03 |
-1.5000E+03 |
-0.0% |
0.01 |
✓ pass |
0015_geometry-0019_beam-chamfer-boundary-pressure-normal |