19. Combined boundary conditions
This test covers the combination of the different boundary conditions.
Geometry and setup
This test uses geometry 4 square beam with center patches.
Load cases
LC01_2xForce_RM: 2x Forces, equal and opposite, no resultant force but does give a moment
LC02_2xForce_RF: 2x Forces, gives resultant force but does not give a moment
LC03_Force+Moment: lx Force and lx Moment, gives resultant force but no moment
LC04_2xMoment: 2x moments, equal and opposite, giving no resultant moment
LC05_Force+Pressure: lx Pressure and lx Force, no resultant force but does give moment
LC06_Force+Pressure: lx Pressure and lx Force, resultant force but no resultant moment
LC07_Force+Moment+Pressure: lx Pressure, lx Force and lx moment, no resultant force and moment
LC08_VolForce+Acceleration: lx Volume Force (VF) and opposing lx Acceleration (VF/m)
LC09_VolForce+Force+Moment: lx Volume Force, lx Force and lx Moment, no resultant force and moment
LC10_Acceleration+Force+Moment: lx Acceleration, lx Force and lx moment, no resultant force and moment
Test results
Table last updated on September 10, 2025 at 13:44 UTC
Version: 2025.09.10.1323_fcc273e8
test |
case |
scalar |
expected |
output |
delta |
tolerance |
status |
test_path |
|---|---|---|---|---|---|---|---|---|
0019 |
LC01_2xForce_RM |
maximum_displacement > solid.1 (m) |
+1.8600E-04 |
+1.8564E-04 |
-0.2% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC01_2xForce_RM |
reaction_forces > solid.1 > surface_set > set.5 > RFx (N) |
+0.0000E+00 |
+2.2668E-08 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC01_2xForce_RM |
reaction_forces > solid.1 > surface_set > set.5 > RFy (N) |
+0.0000E+00 |
+1.1910E-09 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC01_2xForce_RM |
reaction_forces > solid.1 > surface_set > set.5 > RFz (N) |
+0.0000E+00 |
-5.2199E-10 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC01_2xForce_RM |
reaction_moments > solid.1 > surface_set > set.5 > RMx (Nm) |
+0.0000E+00 |
+9.2957E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC01_2xForce_RM |
reaction_moments > solid.1 > surface_set > set.5 > RMy (Nm) |
+0.0000E+00 |
+2.5253E-11 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC01_2xForce_RM |
reaction_moments > solid.1 > surface_set > set.5 > RMz (Nm) |
-4.0000E+01 |
-4.0000E+01 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC01_2xForce_RM |
total_strain_energy > solid.1 (J) |
+1.6400E-01 |
+1.6362E-01 |
-0.2% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC02_2xForce_RF |
maximum_displacement > solid.1 (m) |
+4.8300E-05 |
+4.8311E-05 |
0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC02_2xForce_RF |
reaction_forces > solid.1 > surface_set > set.5 > RFx (N) |
+0.0000E+00 |
+3.6289E-10 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC02_2xForce_RF |
reaction_forces > solid.1 > surface_set > set.5 > RFy (N) |
-2.0000E+03 |
-2.0000E+03 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC02_2xForce_RF |
reaction_forces > solid.1 > surface_set > set.5 > RFz (N) |
+0.0000E+00 |
-3.3287E-10 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC02_2xForce_RF |
reaction_moments > solid.1 > surface_set > set.5 > RMx (Nm) |
+0.0000E+00 |
+1.1515E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC02_2xForce_RF |
reaction_moments > solid.1 > surface_set > set.5 > RMy (Nm) |
+0.0000E+00 |
+3.4001E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC02_2xForce_RF |
reaction_moments > solid.1 > surface_set > set.5 > RMz (Nm) |
+0.0000E+00 |
+4.5139E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC02_2xForce_RF |
total_strain_energy > solid.1 (J) |
+4.4723E-02 |
+4.4723E-02 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC03_Force+Moment |
maximum_displacement > solid.1 (m) |
+7.3000E-05 |
+7.3029E-05 |
0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC03_Force+Moment |
reaction_forces > solid.1 > surface_set > set.5 > RFx (N) |
+0.0000E+00 |
-1.7548E-10 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC03_Force+Moment |
reaction_forces > solid.1 > surface_set > set.5 > RFy (N) |
-1.0000E+03 |
-1.0000E+03 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC03_Force+Moment |
reaction_forces > solid.1 > surface_set > set.5 > RFz (N) |
+0.0000E+00 |
-3.1511E-10 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC03_Force+Moment |
reaction_moments > solid.1 > surface_set > set.5 > RMx (Nm) |
+0.0000E+00 |
+8.7200E-13 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC03_Force+Moment |
reaction_moments > solid.1 > surface_set > set.5 > RMy (Nm) |
+0.0000E+00 |
+2.7464E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC03_Force+Moment |
reaction_moments > solid.1 > surface_set > set.5 > RMz (Nm) |
+0.0000E+00 |
-3.1584E-11 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC03_Force+Moment |
total_strain_energy > solid.1 (J) |
+8.6774E-02 |
+8.6774E-02 |
0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC04_2xMoment |
maximum_displacement > solid.1 (m) |
+6.9600E-05 |
+6.9597E-05 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC04_2xMoment |
reaction_forces > solid.1 > surface_set > set.5 > RFx (N) |
+0.0000E+00 |
+4.9181E-10 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC04_2xMoment |
reaction_forces > solid.1 > surface_set > set.5 > RFy (N) |
+0.0000E+00 |
+1.2077E-08 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC04_2xMoment |
reaction_forces > solid.1 > surface_set > set.5 > RFz (N) |
+0.0000E+00 |
-3.8222E-10 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC04_2xMoment |
reaction_moments > solid.1 > surface_set > set.5 > RMx (Nm) |
+0.0000E+00 |
+1.3737E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC04_2xMoment |
reaction_moments > solid.1 > surface_set > set.5 > RMy (Nm) |
+0.0000E+00 |
+4.3542E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC04_2xMoment |
reaction_moments > solid.1 > surface_set > set.5 > RMz (Nm) |
+0.0000E+00 |
+5.3996E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC04_2xMoment |
total_strain_energy > solid.1 (J) |
+1.2906E-01 |
+1.2906E-01 |
0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC05_Force+Pressure |
maximum_displacement > solid.1 (m) |
+1.8600E-04 |
+1.8564E-04 |
-0.2% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC05_Force+Pressure |
reaction_forces > solid.1 > surface_set > set.5 > RFx (N) |
+0.0000E+00 |
+2.2668E-08 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC05_Force+Pressure |
reaction_forces > solid.1 > surface_set > set.5 > RFy (N) |
+0.0000E+00 |
+1.1910E-09 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC05_Force+Pressure |
reaction_forces > solid.1 > surface_set > set.5 > RFz (N) |
+0.0000E+00 |
-5.2199E-10 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC05_Force+Pressure |
reaction_moments > solid.1 > surface_set > set.5 > RMx (Nm) |
+0.0000E+00 |
+9.2957E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC05_Force+Pressure |
reaction_moments > solid.1 > surface_set > set.5 > RMy (Nm) |
+0.0000E+00 |
+2.5253E-11 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC05_Force+Pressure |
reaction_moments > solid.1 > surface_set > set.5 > RMz (Nm) |
-4.0000E+01 |
-4.0000E+01 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC05_Force+Pressure |
total_strain_energy > solid.1 (J) |
+1.6362E-01 |
+1.6362E-01 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC06_Force+Pressure |
maximum_displacement > solid.1 (m) |
+4.8300E-05 |
+4.8311E-05 |
0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC06_Force+Pressure |
reaction_forces > solid.1 > surface_set > set.5 > RFx (N) |
+0.0000E+00 |
+3.6289E-10 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC06_Force+Pressure |
reaction_forces > solid.1 > surface_set > set.5 > RFy (N) |
-2.0000E+03 |
-2.0000E+03 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC06_Force+Pressure |
reaction_forces > solid.1 > surface_set > set.5 > RFz (N) |
+0.0000E+00 |
-3.3287E-10 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC06_Force+Pressure |
reaction_moments > solid.1 > surface_set > set.5 > RMx (Nm) |
+0.0000E+00 |
+1.1515E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC06_Force+Pressure |
reaction_moments > solid.1 > surface_set > set.5 > RMy (Nm) |
+0.0000E+00 |
+3.4001E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC06_Force+Pressure |
reaction_moments > solid.1 > surface_set > set.5 > RMz (Nm) |
+0.0000E+00 |
+4.5139E-12 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC06_Force+Pressure |
total_strain_energy > solid.1 (J) |
+4.4723E-02 |
+4.4723E-02 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC07_Force+Moment+Pressure |
maximum_displacement > solid.1 (m) |
+9.7900E-05 |
+9.7875E-05 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC07_Force+Moment+Pressure |
reaction_forces > solid.1 > surface_set > set.5 > RFx (N) |
+0.0000E+00 |
-1.6973E-09 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC07_Force+Moment+Pressure |
reaction_forces > solid.1 > surface_set > set.5 > RFy (N) |
+0.0000E+00 |
-1.2157E-08 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC07_Force+Moment+Pressure |
reaction_forces > solid.1 > surface_set > set.5 > RFz (N) |
+0.0000E+00 |
+4.6669E-10 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC07_Force+Moment+Pressure |
reaction_moments > solid.1 > surface_set > set.5 > RMx (Nm) |
+0.0000E+00 |
-2.1521E-12 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC07_Force+Moment+Pressure |
reaction_moments > solid.1 > surface_set > set.5 > RMy (Nm) |
+0.0000E+00 |
-6.6220E-12 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC07_Force+Moment+Pressure |
reaction_moments > solid.1 > surface_set > set.5 > RMz (Nm) |
+0.0000E+00 |
-7.8478E-11 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC07_Force+Moment+Pressure |
total_strain_energy > solid.1 (J) |
+1.8300E-01 |
+1.8346E-01 |
0.3% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC08_VolForce+Acceleration |
maximum_displacement > solid.1 (m) |
+2.9200E-20 |
+2.9207E-20 |
0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC08_VolForce+Acceleration |
reaction_forces > solid.1 > surface_set > set.5 > RFx (N) |
+0.0000E+00 |
-9.5367E-13 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC08_VolForce+Acceleration |
reaction_forces > solid.1 > surface_set > set.5 > RFy (N) |
+0.0000E+00 |
-9.5367E-13 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC08_VolForce+Acceleration |
reaction_forces > solid.1 > surface_set > set.5 > RFz (N) |
+0.0000E+00 |
-9.5367E-13 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC08_VolForce+Acceleration |
reaction_moments > solid.1 > surface_set > set.5 > RMx (Nm) |
+0.0000E+00 |
+4.7684E-15 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC08_VolForce+Acceleration |
reaction_moments > solid.1 > surface_set > set.5 > RMy (Nm) |
+0.0000E+00 |
+1.9742E-27 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC08_VolForce+Acceleration |
reaction_moments > solid.1 > surface_set > set.5 > RMz (Nm) |
+0.0000E+00 |
-4.7684E-15 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC08_VolForce+Acceleration |
total_strain_energy > solid.1 (J) |
+6.5100E-33 |
+6.5078E-33 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC09_VolForce+Force+Moment |
maximum_displacement > solid.1 (m) |
+1.0300E-04 |
+1.0298E-04 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC09_VolForce+Force+Moment |
reaction_forces > solid.1 > surface_set > set.5 > RFx (N) |
+0.0000E+00 |
-1.4649E-10 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC09_VolForce+Force+Moment |
reaction_forces > solid.1 > surface_set > set.5 > RFy (N) |
+0.0000E+00 |
-8.9718E-09 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC09_VolForce+Force+Moment |
reaction_forces > solid.1 > surface_set > set.5 > RFz (N) |
+0.0000E+00 |
-8.9764E-09 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC09_VolForce+Force+Moment |
reaction_moments > solid.1 > surface_set > set.5 > RMx (Nm) |
+0.0000E+00 |
+4.0481E-11 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC09_VolForce+Force+Moment |
reaction_moments > solid.1 > surface_set > set.5 > RMy (Nm) |
+0.0000E+00 |
-1.7261E-11 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC09_VolForce+Force+Moment |
reaction_moments > solid.1 > surface_set > set.5 > RMz (Nm) |
+0.0000E+00 |
+3.1980E-11 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC09_VolForce+Force+Moment |
total_strain_energy > solid.1 (J) |
+1.4700E-01 |
+1.4703E-01 |
0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC10_Acceleration+Force+Moment |
maximum_displacement > solid.1 (m) |
+1.0300E-04 |
+1.0298E-04 |
-0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC10_Acceleration+Force+Moment |
reaction_forces > solid.1 > surface_set > set.5 > RFx (N) |
+0.0000E+00 |
-1.4631E-10 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC10_Acceleration+Force+Moment |
reaction_forces > solid.1 > surface_set > set.5 > RFy (N) |
+0.0000E+00 |
-8.9714E-09 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC10_Acceleration+Force+Moment |
reaction_forces > solid.1 > surface_set > set.5 > RFz (N) |
+0.0000E+00 |
-8.9759E-09 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC10_Acceleration+Force+Moment |
reaction_moments > solid.1 > surface_set > set.5 > RMx (Nm) |
+0.0000E+00 |
+4.0479E-11 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC10_Acceleration+Force+Moment |
reaction_moments > solid.1 > surface_set > set.5 > RMy (Nm) |
+0.0000E+00 |
-1.7256E-11 |
0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC10_Acceleration+Force+Moment |
reaction_moments > solid.1 > surface_set > set.5 > RMz (Nm) |
+0.0000E+00 |
+3.1986E-11 |
-0.00 |
0.10 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |
0019 |
LC10_Acceleration+Force+Moment |
total_strain_energy > solid.1 (J) |
+1.4700E-01 |
+1.4703E-01 |
0.0% |
0.01 |
✓ pass |
0019_geometry-0004_combined-boundary-conditions |